Include CO Detectors Into Your Home Security System

Placing carbon monoxide detectors in your property is a terrific start, but you may elevate your safety even more by including them into your home security system. This provides another safeguard, as your monitoring professionals will be updated whenever a CO detector goes off. This backup can be vital, particularly if a disaster takes place in the early morning hours and you aren’t awakened by the alarm.

Get CO Detectors In Chico With Your Home Security System

Safeguard your family against all sorts of risks with a comprehensive home security package from Secure24 Alarm Systems. Our CO and smoke alarms in Chico are professionally monitored like your other security components. You’ll enjoy support from a dedicated, 24-hour team any time an emergency arises. Dial (530) 205-3977 today to upgrade the defense of your home and family.

Residents must defend against numerous risks like burglary, flooding, and fire. But what about a risk that you are unable to see or smell? Carbon monoxide is different from other risks as you may never be aware that it’s there. Nevertheless, installing CO detectors can simply protect your loved ones and property. Find out more about this potentially lethal gas and where to place carbon monoxide detectors in your Chico property.

What Is Carbon Monoxide?

Referred to as the silent killer because of its lack of odor, taste, or color, carbon monoxide is a readily found gas caused by incomplete fuel combustion. Any fuel-consuming appliance like a furnace or fireplace may generate carbon monoxide. While you usually won’t have a problem, complications can crop up when appliances are not regularly maintained or appropriately vented. These mistakes can cause a build-up of this dangerous gas in your interior. Heating appliances and generators are the most consistent culprits for CO poisoning.

When exposed to minute concentrations of CO, you could notice fatigue, headaches, dizziness nausea, or vomiting. Prolonged exposure to elevated levels can cause cardiorespiratory failure, and even death.

Tips For Where To Place Chico Carbon Monoxide Detectors

If you don’t have at least one carbon monoxide detector in your home, buy one today. Preferably, you ought to install one on every floor of your home, including basements. Explore these tips on where to place carbon monoxide detectors in Chico:

• Put them on each level, especially where you have fuel-burning appliances, such as fireplaces, furnaces, water heaters, and gas dryers.
• Always install one within 10 feet of sleeping areas. If you only have one CO detector, this is where to put it.
• install them approximately 10 to 20 feet away from potential CO producing appliances.
• Avoid affixing them directly above or beside fuel-consuming appliances, as a bit of carbon monoxide might be released when they start and trigger a false alarm.
• Fasten them to walls approximately five feet off the ground so they may test air where occupants are breathing it.
• Avoid putting them beside doors or windows and in dead-air places.
• Put one in areas above garages.

Check your CO detectors often and maintain them in accordance with manufacturer instructions. You will typically have to switch them out every five to six years. You should also make certain any fuel-consuming appliances are in in optimal working condition and appropriately vented.